Markets

Transportation

Pacific Foundation builds deep foundations and shoring for bridges, highways and rail projects.

Experience

Bridge Foundations and Shoring

Pacific installs drilled shafts for bridge piers and overpasses, along with micropiles, retaining walls and ground anchors. At River S, crews drilled bridge foundations from a barge. At OR 217, Pacific drilled shafts and placed reinforcing cages for the Hall Boulevard overpass.

Barge-Mounted Drilling

At River S, Pacific used a Bauer BG55 on a barge, with temporary casing and slurry to support the shaft excavations.

Highway Foundations

Pacific drilled shafts and placed reinforcing cages for the Hall Boulevard overpass within the OR 217 corridor.

Rail Overpasses

Pacific installed the drilled-shaft foundations for Pioneer Street Rail Overpass in Ridgefield, Washington.

Drilled Shafts

Crews excavate a shaft, place a reinforcing cage and fill it with concrete. Pacific's bridge work includes large-diameter shafts installed from a barge at River S.

Micropiles

Micropiles use small-diameter drilled holes, steel reinforcement and grout to transfer structural loads to deeper ground. Smaller drilling equipment allows installation in restricted-access areas.

Soldier Pile Walls

Steel soldier piles and lagging retain the soil as excavation advances. Tiebacks or bracing support the wall where the design requires them.

Secant & Tangent Pile Walls

A row of drilled concrete piles forms the retaining wall. Secant piles overlap; tangent piles are installed side by side.

Soil Nail Walls

Crews drill and grout steel bars into the retained ground, then install the facing as excavation advances. Soil nails reinforce the soil behind the wall.

Ground Anchors / Tiebacks

Crews drill and grout anchors beyond the potential failure zone, then test and tension them to support the shoring wall.

Discuss Your Project

Talk to an Estimator

Send the bridge or roadway plans, geotechnical report and bid date. Include any traffic, rail or in-water work restrictions.